This 80℃-100℃ manganese phosphating liquid is wear-resistant and corrosion-resistant, suitable for use in various steel materials such as hardware, tools, fasteners, mechanical parts, chains, springs, gears, molds, bearings, automobile and optical instrument parts, etc.
This 80℃-100℃ manganese phosphating liquid has simple technology, low cost and long service life. The required equipment is simple and easy to operate. It can be used for small-scale workpiece processing or large-scale automated processes, and can meet production requirements at any time.
Phosphating is a process in which the workpiece undergoes chemical and electrochemical reactions with the phosphating solution to form a phosphate chemical conversion film. The phosphate conversion film is called a phosphating film. The phosphating film of this 80℃-100℃ manganese phosphating liquid has good friction-reducing and self-lubricating effects. It also has the advantages of low cost and simple operation. It is widely used in high-speed running parts such as automobiles, motorcycles, and ships.
This 80℃-100℃ manganese phosphating liquid is used to form films on the surface of aluminum and iron workpieces, and is suitable for spray lines and soaking lines. After treatment, the surface of the workpiece will generally appear as a purple-blue (or golden yellow, depending on the material) amorphous film. The film layer is uniform and dense, with less sediment in the bath liquid, good anti-corrosion performance, good paint adhesion, and a smooth and beautiful surface. The subsequent processes are suitable for coating processes such as powder spraying, spray painting, and electrophoresis. The concentration of the tank is 6-8%, that is, 60kg-80kg of potion is added to 1 ton of tank liquid.
Precautions
1. The pre-treatment must be thorough in removing oil and rust, otherwise it will affect the quality of phosphating.
2. The workpiece must be washed before phosphating to prevent acid radicals from being brought into the phosphating tank and destroying the solution.
3. The workpiece should be shaken up and down after entering the groove to prevent complex porous parts from being phosphated.
4. When using HH315X, the operator should wear protective equipment to avoid contact with skin and eyes.
Hot Tags: 80℃-100℃ manganese phosphating liquid, China 80℃-100℃ manganese phosphating liquid manufacturers, suppliers, factory, blackening mixture, polishing tool blackening agent, power tool blackening agent, surface treatment blackening agent, belt buckle blackening agent, tool blackening agent
