Metal cleaner solution

This product is mainly used for steel workpiece rust prevention, especially for low, medium and high carbon steel, stainless steel and other workpiece rust prevention, the effect is more prominent.

1. Anti-rust effect is obvious, 48 hours salt spray without rust.

2. This product belongs to water-based products.

3. Wide processing range, one kilogram can handle more than 20 square meters. 1. If there is oil, rust and oxide on the surface of the workpiece, it is necessary to do a good job of corresponding pretreatment. 2. This product is used with water, the water ratio is 1:2-3. The treatment time is about 2-3 minutes.

4. Remove to dry.

5. Recommended process: oil removal - rust removal, skin oxidation - rust prevention - protection.

   1)This product does not contain irritants to the skin, but it is recommended to wear protective gloves when operating.

   2)If there is rust or oil on the surface, use this product after pretreatment.

   3)Add the use of liquid during use, without scrapping.

 Copper cleaning agent can effectively remove dirt and oil on the surface of copper, including oxide, grease, stains and so on. After the use of copper cleaning agent, the copper surface will restore the original luster and keep clean.

 The main ingredients are cleaning agent mother liquor, organotin catalyst, penetrant, salt, acid, surfactant, penetrant and other additives. Acid can chemically react with copper oxide to remove oxide; Surfactants can reduce the surface tension, help the cleaning agent spread on the copper surface and dissolve dirt; The penetrant can penetrate into the dirt, making it easier for the cleaning agent to dissolve and take it away

Advantage:

1. Quick performance: Copper cleaning agent can effectively remove all kinds of dirt on the copper surface, saving time and manpower.

2. Environmental protection: Copper cleaning agent generally does not contain corrosive substances, such as trichloromethane, carbon tetrachloride and other toxic and harmful substances, friendly to the environment.

3. Safety: Copper cleaning agent is usually specially treated, will not cause harm to the human body, and is safer to use.

4. Wide applicability: Copper cleaning agent can be applied to various types of dirt and oil, and has a wide range of application.

Compared with other copper cleaning agents, there may be a different combination of additives to achieve a better cleaning effect. For example, some products may focus on the anti-rust performance of copper parts, adding special anti-rust agents, so that the copper parts have a better anti-rust effect after cleaning. And some products may be more focused on the oxidation protection of copper parts, adding special antioxidants, so that the cleaned copper parts will not be oxidized again for a period of time. What does the end result look like, often depending on the specific application scenario and requirements

Under normal circumstances, the cleaning process of industrial oil, dirt and oxide skin on the surface of aluminum alloy includes the process of oil removal, skin removal, passivation and rust prevention. Take the latest aluminum alloy strong cleaning agent as an example: The latest aluminum alloy strong cleaning agent is a weak acid industrial cleaning agent, with low volatility, no heavy metal elements, fast cleaning speed and other advantages. In a short period of time, the surface of aluminum alloy products such as oil, dirt, oxide and other stains clean at a time, room temperature cleaning, no need to warm.